Watery Filters is reader-supported. When you purchase via links on our site, we may earn an affiliate commission at no extra cost to you. Learn more.

Woder Water Filter Review: Brand You Probably Already Know About


Woder-Water-Filter-reviewLet’s explore this Woder water filter review to see if it fulfills your expectation and provides you with a fresh, crisp, and safe glass of water.

Under-sink water filtration systems, in our opinion, are significantly superior to typical water filter pitchers. You benefit from fresh purified water directly from the tap with an under-sink system.

After analyzing this Woder 10k-gen3 undersink water filter review , it will attach to your current waterline, allowing you to drink filtered water straight at your sink faucet, meaning no more complicated water system with tones of instruction and precaution.

Everything About The Woder Water Filter Review

In this article about the Woder 10k-gen3 undersink water filter review, we will look through its features and functionality to ensure that your investment and health are not taken for granted.

Features

Brand: Woder

Capacity: 10000 Gallons

Material: WD-FC-02

Woder-10K-DC

CHECK LATEST PRICE

 

Filter Eliminate

Eliminates lead, aluminum, toxic metals, chlorine (99%) , pollutants (99%), mercury, PFCs, chloramines glyphosate, turbidity chromium 6, nitrates, copper, VOCs, odors, and unpleasant tastes.

Filtration Capacity

This under-sink can filter up to 10,000 gallons of water meaning it will typically last for three years, which is quite impressive.

Filtration Speed

You get a constant flow of 3 gallons per minute of filtered water directly from your kitchen tap

Warranty

You get one year of warranty with every new filter to assure consumer trust and safety.

Certification

WQA has certified this unit to NSF/ANSI 42 for chlorine aftertaste and odor and NSF/ANSI 372 for lead-free compliance, as evidenced by test results.

Easy Installation

The installation process is straightforward. The entire procedure should take between 15-and 20 minutes. The water filtration kit comes with whatever you need.

All you’ll need is a wrench from there. You attach the unit straight into your cold water pipe to install it. No external faucet is needed.

Scale Buildup Prevention

With dual Sedimentation Reduction, a Filtration System is recommended if your water source has high amounts of sediment to prevent filter life loss due to particulate buildup.

Water sources with increased sand and contaminants, rust from old pipes, upstream manufacturing attributing to extra sedimentation finding its way into someone’s water system.

The water sources with elevated amounts of dust and pollutants can all contribute to incompatible water situations with a single-stage filter system.

Other Features

  • Dimension: 12 x 2.52 x 2.52
  • Weight: 1.9 lb
  • Operating pressure: 125 psi
  • Temperature range: 3-50 celsius

Customer Reviews

The product arrived quickly, and I could install it in about 30 minutes. My water from the tap had recently tested strong for copper (1398 ug/L, but in my Canadian province, less than 1000 ug/L is recommended) (Sask.). I re-tested the water after installing the filter, and it is now 16.8. It also filters out other things. A plus is that the kids appreciate it so much that they no longer ask for bottled water. The kind of love that lasts three years. It’s well worth it!

Steven
<b>Steven </b>

I just bought another one. my first filtration system lasted a year and a half. Water flow has reduced the flow to approximately 1 GPM. The water tasted nice at the end of its life and provided sufficient pressure to wash the dishes and other household items, especially when mixed with hot water.

Emma Johnson
<b>Emma Johnson</b>

It was a breeze to install, and the hose connections were just what I required (3/8″ male/female), which was a huge relief. Sturdy attachments, no leaks thus far, despite the lack of “Plug’n’Play” filter changes.
The improvement was not spectacular because the water in my location only had a mild chlorine flavor, but it did remove the municipal component from my perspective.

Jim. H
<b>Jim. H</b>

Water pressure began to diminish around two months after installation. I contacted the company, outlining the situation and how long the filter had been in place. They provided me with a completely new filter. It is working fine with no pressure drop or anything to this date.

Jeffrey Dorman
<b>Jeffrey Dorman</b>

Frequently Asked Questions (FAQs)

How much iron will it get rid of?

The answer is that it varies on the starting levels. This undersink filtration system will eliminate 99.9% of toxic metals from municipally treated water to the EPA’s acceptable iron level.

How can you know whether you’ve surpassed 10,000 gallons even before the end of the three years?

When the water flow slows down, and the flavor of the water resembles the taste before using a 10K undersink water filter, you’ll know it’s achieved 10,000 gallons. The formula is similar to industrial uses to remove huge volumes of pollutants at higher concentrations.

These industrial consequences are not common in drinkable water (municipal water); hence the filter’s capacity is increased, even above the specified three years / 10,000-gallon capacity.

Pros

  • The filtration unit is BPA-free.
  • Filter lasts up to 10000 gallons.
  • NSF certified.
  • Easy installation within minimal time.
  • Do not strip minerals from water.

Cons

  • This unit cannot work with hot water.
  • Not suitable for highly contaminated water.
  • Sometimes water pressure slows down.

Verdict

In this Woder water filter review , we found that it removes lead, chlorine, sediment, and other substances abundant in water absorbed from earth or residual remains after chemicals and other disinfection.

This unit is not under budget but has easy installation and maintenance criteria. also, its filtration capacity is much higher in such a price range. We can say that this under sink filter system is overall a good option to consider for yourself.

Leave a Comment