Replacing Frigidaire Water Filter: Step by Step Guide

In Frigidaire Refrigerator, a Pure Source Ultra water filter is used. This water filter removes 99% of chemicals and microscopic contaminants from regular tap water. Frigidaire refrigerators provide crystal clear drinking water.

In Frigidaire Refrigerator, the water reaches the ice maker after circulating throughout the water filter. Here are some essential queries about the maintenance and replacing Frigidaire water filter.

When it necessary to replace the water filter?

Generally, for clean and good tasting water, change your Frigidaire Refrigerator water filter every six months. If you have no idea of the first water filter installation, check the small light on your filter setting screen. When this light turns red, it’s time to replace the filter.

What can happen if you do not replace your Frigidaire water filter?

First of all, if you do not change your refrigerator water filter timely, your drinking water is not filtered correctly. It can alter the flavor and smell of drinking water. It may become the reason for dump buildup and scale into water and ice machine. It also damages the refrigerator appliances.

Where in the Frigidaire Refrigerator Water Filter is placed?

Different models of Frigidaire Refrigerators have three different types of water filter, which are PureSourec Ultra Water Filter, PureSource 2 Ultra Water Filter, and PureSource Plus Water Filter, respectively. These water filters are commonly placed at the top-right corner of the Frigidaire Refrigerator interior.

Steps for replacing frigidaire water filter

Replacement of Frigidaire Refrigerator water filter is essential to keep your drinking water crystal clear and contaminants free. In this guidance article to replace different water filters of Frigidaire Refrigerator, water filters are present.

Steps to replace PureSource Ultra Water Filter

PureSource Ultra Water Filter is a push design filter used in French door refrigerator models. To replace your PureSource Ultra Water Filter in a few minutes, follow these steps;

1. First, remove the freezer cover and turn off the ice maker to stop water from leaking during filter replacement.
2. To get rid of the old water filter from the filter house. Just push the filter, pull it out from the filter house, and discard it.
3. Remove the protective shrink wrap from the new filter and remove nozzles caps.
4. To install the new filter, insert it into the filter house and push until it fixes at its place with a click.
5. Fill a glass of water to check any water filter housing leaks and clear the air from the water filter line.
6. Before use, drain out the water for four minutes or discard the 1.5 gallons of water to flush the system.
7. After that, turn on the ice maker and reset the filter system until the light turns green.

Steps to replace PureSource 2 Ultra Water Filter

Frigidaire PureSource 2 Ultra Water Filter is a push and twist install filter. To replace your PureSource Ultra 2 Water Filter in a few minutes, follow these steps;

1. To prevent the system from water leaks during filter replacement, turn off the ice maker.
2. To remove the old water filter, twist the filter anti-clockwise. Remove and discard old filters.
3. Unpack the new water filter, and before installation, remove the protective shrink-wrap from the new filter.
4. After installing the new filter, slide the new filter into the house. Push the water filter and turn 90° clockwise until it fixes into its place.
5. Fill a glass of water from the dispenser to clear the air from the filter line and check any leaks from the water filter system.
6. Drain the water for three minutes or discard approximately 1.5 gallons of water to flush out the system impurities before use.
7. Turn on the ice maker, restart the filter timer, and press the small button on the display screen for a few seconds until the light turns green.

Steps to replace PureSource Plus Water Filter

PureSource Plus Water Filter is a cup water filter. To replace your PureSource Plus Water Filter in a few minutes, follow these steps;

1. Turn off the refrigerator.
2. Turn off the water supply.
3. Remove the filter cover by twisting it anti-clockwise and remove the filter by pulling it downward.
4. take out the new filter from its parcel.
5. Place the new filter into their compartment and push it upward to fix at their place; then, place the filter cover at its home and close it by twisting clockwise.
6. Turn on the refrigerator.
7. Turn on the water supply.
8. Fill up a glass of water to clear the air from filter lines and check the system works properly and no leaks are present.

How does Refrigerator Water Filter work?

Refrigerator water filters clean the water by the triple filtration process. These filters force the water via three different stages to remove chemicals, contaminants, and dangerous particles from tap water.

1. The Particle-Filtration stage lump the bigger particles like sand and silt.
2. The Micro-Filtration stage confines the medium-sized pollutants like cysts and sugars.
3. The Adsorption-Filtration step helps suck up the microscopic contaminants like ions, molecules, or atoms to form a gas.

After the replacement of the filter, why does fridge water turn cloudy?

If your fridge water turns to a cloudy texture, it means that the air remains in the corners of the water filter house after replacing the filter. By filling a glass of water, you can test this leave the glass on the table for some time; the air will disperse in the air from the underside of the glass by leaving clear filter water in the jug.

How can we fix the cloudy water in the fridge filter?

By flushing out the system air, you can make the water clear—flush air by draining 3 gallons of water. Fill water to drain in intervals of 5 seconds.

What happens when you change your water filter?

When you change your refrigerator water filter on time, it keeps your drinking water clean and clear. However, if you are satisfied with your county water supply, this additional water filter helps clean water from several latent deposits.