Why Is My Pur Filter Light Not Working And How To Reset Pur Filter Light?

Water filters have now become an essential part of our life because they provide us with water that is free from bacteria , dust, and chemical to soften our water . Therefore, we install water filters into our homes to drink pure water. There is a filter that I recommend most is the PUR filter. Continue reading this guide to know about how to reset pur filter light.

Mercury, chlorine, benzene, ethylbenzene, and toluene are all removed through the PUR faucet and pitcher filters. When it’s time to change or replace the filter, the PUR water filter light provides a handy indicator.

Each system has its configuration, but they all work the same way. But what if the light in your PUR water filter suddenly goes out?

In addition to lead and asbestos, the PUR filter removes more pollutants and pesticides than the base filter. First of all, a PUR water filter is designed to remove dangerous contaminants from your drinking water and consume it safely.

Lead, chlorides, mercury, iron, insecticides, iron, arsenic, and even perfumes are examples of such substances.

You may also like Doulton Water Filter, Click Here to check this water filter review.

What is PUR Filter Light?

PUR water filter helps you to remove all the bacteria and unnecessary chemicals from the water that make the water safe to drink. The PUR water filter LED is a mechanism that displays the status of the filtering operation of your PUR filter. This tool will alert you when it’s time to replace your cartridge.

In addition, it warns users of any potential system difficulties so that they can be treated before they become harmful to the user’s health.

How does PUR Water Filter Light Works?

Green, yellow and red PUR water filter lights are available. If the indicator is green, you can be sure that your water supply is pollutant-free and drinkable, as this means that the filter is working properly.  

You can see the light turn yellow after the filter has been used for a long time, indicating that the life of the filter is coming to an end.  

PUR filters have a variable lifespan, with faucet filters typically filtering up to 100 gallons for 3 months and jug and dispenser filters often filtering up to 40 gallons for 1-2 months.

However, we do not always have the opportunity to keep an eye on the time since the first use of our filter. Filter lights are very useful because they allow you to more accurately see when you need to change your filter.  

The filter has reached its limit when the LED turns red. At this point, the filter is clogged with pollutants and can no longer filter your water. This would require the immediate replacement of the filter.

Red light:

When the system detects that a cartridge needs to be replaced, the PUR water filter light lights up red. The PUR water filter light should turn green once these things are set and the system is ready for use.  

If the red PUR water filters light remains on after replacing the cartridge, it means that the system has not been activated properly or that it needs to be reset.

Yellow light:

The colour is a warning light that indicates that it is time to replace your PUR water filter. It will no longer be able to filter your water for much longer. After a few litres, the system stops working and starts flashing red.

Green light:

Your water filter works properly when the light is green. You don’t have to worry because the water flowing through your filter is drinkable.  

When you replace the old filter after that, the light should also turn green. The green light may flash from time to time, but that’s not a problem.

Why Is My PUR Filter Light Not Working?

After 1 to 3 years, PUR water filter lamps may stop working due to a non-replaceable battery that is empty. If the filter cartridge is not installed correctly, if there is dirt in the filter housing, or if the reset button is stuck, the filter light may not work properly or may continue to blink.

The PUR water filter light may not work for various reasons. Consider the following options:

  1. Non-replaceable batteries are no longer functional.
  2. A flashing or flashing red light indicates that the filter needs to be replaced.
  3. A flashing/flashing red light after installing a new filter may indicate dirt in the filter housing.
  4. The reset button is blocked.

How To Reset PUR Filter Light?

After changing your water filter, you need to reset your PUR water filter lighting. If you’re wondering how to reset a PUR water filter, don’t worry. it’s not hard. It’s as easy as pressing the reset button on the PUR water filter.  

Reset the PUR water faucet light:

If you have water filter lights on your faucet filter, you need to reset the lights after changing the filter. This will help ensure that your water supply from the tap is always clean. Follow these instructions to reset the PUR filter light on the faucet filter:

  1. Remove the filter system from the faucet by unscrewing it.
  2. Unscrew the rear cover to open the case. 
  3. Remove the filter from the chassis and set it aside.
  4. Press the reset button in the lower right corner of the case several times until it appears.
  5. Replace the filter in the housing and cover it with the lid.
  6. Reattach the filter system to the faucet.

Once you have completed the previous procedures, the green light will start flashing. Your faucet filter should reset at this time.

Reset the PUR Pitcher Water Filter Light:

In addition to changing the filter, a light reset of the PUR filter is necessary for PUR pitcher water filters with indicator lights. After changing your water filter, make sure that the lights in your filter reset already, as the lights track how long your filter has been used.  

The extra task of resetting filter lights is simple enough that even a teenager can do it. Just click the reset button to reset the PUR water filter LED for a jug filter.

You can easily find it near the lights on top of the jug. After that, you will have to hold it for five seconds before letting it go.

What If PUR Filter Light Not Resetting?

Due to the dirt clogging the filter screen of all PUR units, the light may refuse to be reset in rare situations. Therefore, the system assumes that your filter is not working properly. First, rinse the entire filter housing to get rid of trapped particles.

After drying, mount the entire system and then press and hold the reset button for three seconds (for PUR faucets) or five seconds (for other faucets) (for jugs or PUR dispensers). The light of the PUR filter should change from red to green.

Conclusion

PUR water filter is helpful in our daily life. This is why we need to learn some troubleshooting techniques about the filter. If you have properly learned the content, then you now become able to reset the PUR lights and also troubleshoot, if there’s any problem occurs.

These small tips help you in problem-solving and you don’t want to call any expert.

Leave a Comment