Table of Contents
Done are the days when refrigerators were single purpose. In the era of technology, refrigerators are definitely at their A-game. But with luxury and comfort comes responsibility.
For instance, with a Whirlpool French door refrigerator, you have the luxury of enjoying fresh and clean tasting water and ice. But at the same time, you are required to replace the water filter every six months to prevent clogging and unhygienic water.
Not sure how to do it? Not to worry because we have got you covered. Continue reading to find out how you can locate and replace your Whirlpool refrigerator’s water filter hassle-free.
Choose Your Water Filter
Replacing an old water filter can be a complex process, especially for first-timers. One of the major reasons that makes it complex is choosing the right water filter for your refrigerator.
Since Whirlpool has manufactured an entire line of French Door Refrigerators, thus they come with different types of water filters depending on their make and model.
The best approach to finding a compatible water filter is to note down your refrigerator’s model number. Search it up on Whirlpool’s official website. With just a click, you will have the answer to the most important question, which water filter does your refrigerator needs.
You may also like: Tips On How To Keep Dogs Water From Freezing?
Locate and Replace
Once you have the replacement filter, it is time to get your hands dirty. Since Whirlpool offers four different water filters, thus let us have a look at how you can replace each one of them on your own successfully.
Filter 1
- First things first. You need to locate your water filter.
- Open the right-side door and locate the water filter cover in the upper right corner.
- If it is not there, try the base grille. It has to be in one of the two spots.
- Once located, push the filter cover in the upwards direction.
- The cover will pop open.
- Now, remove the old filter from within and discard it accordingly.
- Next, you need to get your new water filter and remove the protective coverings. You need to be careful because the coverings mostly surround the O-rings, which should remain intact even after removing the protective covering.
- Now, look for the arrow pointing in the upwards direction on the filter.
- Make sure that the arrow is facing upwards when you gently glide the filter in the slot.
- Never push the filter. Instead, rotate it gently until the notches, and the grooves perfectly align with one another.
- Push the filter cover upwards to snap it close.
- Now, run at least four gallons of water through your new filter to properly flush it out before using it.
Filter 2
- Reach within your refrigerator in the upper right corner to locate the water filter cover.
- Pull it in the downwards direction to open the door.
- To remove the old filter, pull it downwards so it is angled outwards.
- Discard the old filter and get your new filter.
- Remove the protective coverings from it. You need to be careful because the coverings mostly surround the O-rings, which should remain intact even after removing the protective covering.
- Locate the arrow on the filter and insert it in the slot in such a way that the arrow is pointing upwards.
- Rotate the filter until it is locked in place.
- Snap the filter cover shut with a simple push.
- Lastly, run at least four gallons of water through your new filter to properly flush it out before using it.
Filter 3
- Find the filter cover on the left side of your refrigerator’s base grille.
- You will notice an eject button on the cover.
- Give it a slight push to release the filter.
- Pull the old filter out of the slot and discard it accordingly.
- Remove the protective coverings from your new filter. Make sure the O-rings remain intact even after removing the protective covering.
- Once done, place the filter cap on top of the new cartridges. Rotate the cap in the clockwise direction, so the ridges are aligned in place.
- Next, insert the filter in the slot so that the arrow is pointing towards the left.
- Give a slight push until the eject button pops out.
- Now, run four gallons of water through the new filter to properly flush the chemicals and prepare it for safe and healthy water.
Filter 4
- Locate the cover of your water filter in the interior of your refrigerator at the upper right corner.
- Depending on the model of your refrigerator, the filter tab can be facing outwards or can be located within a cover.
- If facing outwards, give a slight push and pull the cover downwards. However, if the tab is located at the bottom, locate the small lever on the cover and pull it forward and downwards to open the cover.
- Rotate the filter to the left and pull it out.
- Discard and the old filter and bring your new filter out.
- If you are installing the filter for the first time, you will find a filter cap inside the slot. Rotate it in the counterclockwise direction to remove it gently.
- Now, insert the new filter in place, ensuring that the notches and the grooves perfectly align with one another.
- Push the filter in the upwards direction to lock it in place.
- Do the same with the filter door to snap it close.
- Lastly, run four gallons of water through the new filter to properly flush the chemicals and prepare them for safe and healthy water.
Takeaways